Inuteq Bodycool Smart Coolover

An ode to the Bodycool Smart CoolOver cooling vest

A cooling cape with superpowers

The Bodycool Smart CoolOver is one of those things that makes you think: why didn't I have this sooner? You throw it on, fill it with water, and suddenly you're walking around with your own portable "non-melting" mode. No battery, no gel packs, just you and your inner winter person.

Why the Bodycool Smart CoolOver cooling vest?

A cold shiver

The Bodycool Smart CoolOver cooling vest provides extra cooling on warm days. You activate it with tap water (max. 500 ml) and cooling starts immediately. The cooling effect lasts 8 to 72 hours, depending on conditions such as airflow, humidity, and ambient temperature.

Various purposes

Thanks to INUTEQ-DRY technology, the cooling vest stays dry on both the inside and outside. This means you can also wear it under regular (breathable) clothing. However, airflow is key. The more air circulation, the better the cooling effect and the longer it lasts.

If you wear something over the cooling vest, it can affect the cooling. Are you wearing a completely airtight suit? Then choose a PAC cooling vest.

What makes the Bodycool Smart CoolOver cooling vest so good?

Comfortable

The Bodycool Smart CoolOver is a comfortable and lightweight cooling vest. You wear it like a slip-on vest, and it fastens with adjustable straps. The entire vest stays dry, doesn't feel clammy, and can cool up to 15°C below ambient temperature (depending on conditions).

Different layers

The cooling vest consists of different layers/materials so that the water is evenly distributed and can evaporate in a controlled manner. The outer material is INUTEQ-DRY Nylon Jersey (50%) and PU (50%) with an Ultra Fresh antibacterial treatment. The core is INUTEQ-DRY cooling fabric, and the inner material is also INUTEQ-DRY nylon.

Get the most out of your Bodycool Smart CoolOver cooling vest

Easy to use

Activation is simple: fill the cooling vest through the opening at the back with clean (tap) water, maximum 500 ml (do not overfill). Then distribute the water evenly and squeeze out any excess water. After that, it's: put it on and get instant cooling.

Don't miss this either

In the washing machine

The Bodycool Smart CoolOver cooling vest can be washed in the washing machine at a maximum of 40°C. Make sure to close the filling opening/fastener properly. Use a mild detergent, let the vest hang dry, and definitely leave your iron or steamer alone. Also, skip the tumble dryer.

The right colour and size

We sell this version in black. You can choose from sizes S/M, L/XL, and 2XL/3XL. You can find out which size suits you in the size chart on the right side of this page.

Cooling accessories

Are you looking for even more cooling? A cooling bandana, a cooling towel, or a neck cooler can also offer an excellent solution for extreme heat.

Pros and cons

•  Provides cooling
•  Stays dry (INUTEQ-DRY)
•  Max. 500 ml, immediate effect
•  Cools for up to 72 hours
•  Requires airflow

Washing instructions

Brief specifications

Product features

•  Comfortable and lightweight
•  No fridge, gels or chemicals needed
•  Stays 100% dry on inside and outside
•  Reduces heat stress and fatigue
•  Easy to (re)activate
•  Can be filled with tap water (max. 500 ml)
•  Machine washable
•  Sizes S/M, L/XL and 2XL/3XL
•  Available from us in black

Size chart

1. Chest Measure your chest circumference at its widest point. 2. Waist Measure where your waist circumference is narrowest.

Inuteq size	1. Chest width (cm)	2. Waist width (cm)
S/M	90-94	78-82
L/XL	96-100	84-88
2XL/3XL	102-106	90-94

If your chest and waist measurements fall into different sizes, choose the size that corresponds to your chest width.

Downloads

What's in the box?

• 1 x Bodycool Smart CoolOver cooling vest
• 1 x Manual

Frequently asked questions