Offerte aanvragen
Jouw offerte op maat, binnen 24 uur in je mailbox. Voor als je interesse hebt in aantallen. Of goedkeuring nodig hebt voor je bestelling.
Je vraagt een offerte aan voor:
Stel hier je vraag over dit product
Ergopro VOLT_IN Ring Ø54 mm White built-in socket
Beschrijving Ergopro VOLT_IN Ring Ø54 mm White built-in socket
An ode to the Ergopro Volt_In Ring
Stylish and easy!
No more hassle with loose chargers and tangled cables! The Volt-In Ring is the ideal solution to keep your workspace organised and efficient. Thanks to its compact and stylish design, you can seamlessly integrate this socket module into your desk or conference table.
Why the Ergopro Volt_In Ring
First, you need a 54 mm drill hole. You can clamp this Volt_In Ring into the desktop using the mounting ring that you can screw onto the Ring. For this, you need to be able to access the rear. If that's not possible, you can also choose to clamp it using the screw clamps. These are hidden under the cover ring of the Volt_In Ring. This allows you to install it, for example, in a piece of furniture, a cupboard, or even a hollow wall.
Good to know: the Volt_In Ring is CE-certified and suitable for a desktop thickness of 0 to 5 cm.
Installation in 6 steps
The basics are simple: Ø54 mm drill hole, desktop thickness 0 to 5 cm, and ensure you have enough space under the desktop (total module height 60 mm).
- Determine the location and check under the desktop if you have enough free space.
- Mark the drill hole and drill a Ø54 mm hole (e.g., with a hole saw).
- Insert the Volt_In Ring from above through the hole.
- Choose how to secure it:
A) Can you access the underside? Screw the mounting ring onto the underside until the module is firmly clamped.
B) Can't you access the underside? Use the screw clamps and tighten the (two) clamps from above. - Click the cover ring into place for a sleek finish.
- Connect the plug (Schuko, 1.5 metres) and you're done.
Don't miss this either
Want to be sure the Volt_In Ring fits correctly? Grab a tape measure. You'll need a 54 mm drill hole. The ring that rests on the desk is 60 mm wide, and the cover ring that goes over it measures 67 mm. The total height of the module is 60 mm, so also consider this under the desktop. The suitable desktop thickness for mounting is 0 to 5 cm.
Pros and Cons
- Easy installation
- Takes up little space
- Sleek design
- Fits a standard 54 mm drill hole
- Installation requires tools
Brief specifications
| Earthing | Earthed |
| Mounting | In the desktop (Ø54 mm drill hole) – to be secured with a mounting ring or screw clamps |
| Suitable desktop thickness | 0 - 5 cm |
| Certification | CE |
| Outer dimension cover ring | Ø67 mm |
| Top edge (on desk) | Ø60 mm |
| Total module height | 60 mm |
| Connection cable length | 1.5 metres |
| Maximum load | 3500W / 16A / 250V~ |
Product features
- CE-certified
- Suitable for desktop thickness 0 - 5 cm
- Earthed socket
- 230V connection
- 1.5 metre connection cable
- Ø54 mm drill hole
- Top edge Ø60 mm
- Cover ring Ø67 mm
- Total module height 60 mm
- Maximum load 3500W / 16A
What's in the box?
- 1 x Volt_In Ring
- 1 x Mounting ring
- 1 x Cover ring
Frequently asked questions
Specificaties
| Item number | ERGO-EPVIRING54 (B/W) |
| Brand | Ergopro |
| Warranty | 2 years |
| Type of guarantee | The Ergowerken free return guarantee service |
| Number of sockets | 1 |
| Method of installation | Transit |
| Earthing | Earthing |
Reviews Ergopro VOLT_IN Ring Ø54 mm White built-in socket
