
Stel hier je vraag over dit product
Cable and power kit for sit-stand desk with cable tray
Product description of Cable and power kit for sit-stand desk with cable tray
What's in the kit?
The Cable and power kit for sit-stand desk with cable tray contains six products. The table shows what they do and where they go. Click a product to open its own product page.
| Product | Where |
| Ergopro Extend cable tray 96 to 166 cm | Under the desktop |
| Cable Snake 20 mm, 2 metres with installation tool | Along the leg |
| Ergo Organizer cable clips (10 pieces) | On the desk edge |
| Textie hook-and-loop tape (5 metre roll) | Around the cable bundle |
| VOLT_IN Ring Ø60 mm with USB-A and USB-C charger | In the desktop |
| 6-way power strip with 3 metre connection cable | Under the desktop |
You choose the colour above: black or white. It applies to the cable tray, the Cable Snake and the VOLT_IN Ring. The white versions also have their own page: Extend white, Cable Snake white and VOLT_IN Ring white. The cable clips and tape are always black, and the power strip comes in one version.
Why the Cable and power kit for sit-stand desk with cable tray?
A sit-stand desk moves up and down, and everything on it needs power. With this kit the socket sits in your desktop and the power strip hangs underneath. The cables run bundled along the leg to the floor, so they move along neatly.
That way you sort out cables and power in one order, in the colour of your desk frame. If you only want tidy cables, the Cable kit for sit-stand desk with Cable Snake, clips and velcro is enough. If you only want power in the desktop, take a look at the Desk power kit: built-in socket with power strip.
What does each part do?
Extend cable tray under the desktop
You screw the Ergopro Extend under your desktop. It extends from 96 to 166 cm and folds open when you want to add something later. The cable tray holds the cords, chargers and any spare cable length. Allow about 15 minutes of assembly with a screwdriver.
Cable Snake along the leg
The Cable Snake is a 20 mm spiral that bundles the cables from your desk. With the included installation tool you zip the cables in within a few minutes. It holds 7 cables on average. If 2 metres is too long, cut the Cable Snake to length with scissors.
Cable clips on the desk edge
You stick the Ergo Organizer cable clips under or on the edge of your desktop with 3M strips. You get 6 small clips for 1 cable, 2 medium ones for 3 cables and 2 large ones for 6 cables. That way you guide your laptop charger, for example, exactly where you want it. Degrease the spot first, so the cable clips stay in place better.
Hook-and-loop tape around the bundle
The Textie hook-and-loop tape comes on a 5 metre roll. Cut off a piece and tie the cables together where they leave the Cable Snake, or under your desktop. The tape can be reclosed up to 400 times, so adding or removing a cable is quick.
VOLT_IN Ring with USB in the desktop
The VOLT_IN Ring Ø60 mm gives you a grounded socket, a USB-A charger, a USB-C charger and a USB-C data port in one built-in unit. It fits in a round hole of 60 mm. You fix it with the mounting nut or with the screw clamps under the cover plate. The cord is 1.5 metres long, with a grounded plug.
Power strip under the desktop
The 6-way power strip has 6 sockets and comes with mounting brackets, so you can fix it under your desktop. The 3 metre connection cable attaches to the power strip with a pluggable connector. You plug the VOLT_IN Ring into it, along with your monitor and laptop charger, for example.
Does the kit fit my desk?
Hole for the VOLT_IN Ring
The VOLT_IN Ring from the kit needs a round hole of 60 mm in your desktop. If your desktop already has a round hole of that size, you use it. Otherwise you make the hole with a hole saw, which is not included in the kit.
Space under the desktop
Check that your desktop is at least 20 mm thick and that there is 96 to 166 cm of space under the desktop between the legs or the crossbar. You then slide the Extend cable tray to the exact size. The cord of the VOLT_IN Ring is 1.5 metres, so mount the power strip within that distance.
Length to the socket
The Cable Snake in the kit is 2 metres long and the connection cable of the power strip 3 metres. Measure the distance from your desktop at its highest position to the socket on the floor or wall. If the Cable Snake is too long, cut off the rest.
Pros and cons
- Cables and power for your sit-stand desk in one order
- Socket and USB chargers in the desktop
- Cables move along with the desktop
- Cable Snake and tape can be cut to length
- Cable tray, snake and Ring in black or white
- You need a 60 mm round hole in your desktop, hole saw not included
- Less suitable if your desktop is thinner than 20 mm
Short specifications
In short: the Cable and power kit for sit-stand desk with cable tray is a set for cable management and power at a sit-stand desk. Important: the cables move along with the desktop, and the socket with USB sits in your desktop.
| Colours | Black, white |
| Cable tray | 96 to 166 cm, depth 128 mm |
| Height cable tray | Black 57 to 102 mm, white 57 to 77 mm |
| Desktop thickness | At least 20 mm |
| Cable Snake | 20 mm, 2 metres |
| Cable clips | 10 pieces (6 small, 2 medium, 2 large) |
| Hook-and-loop tape | 5 m x 12.5 mm |
| VOLT_IN Ring | Drill hole 60 mm, socket, USB-A charger, USB-C charger, USB-C data |
| Power strip | 6 sockets, connection cable 3 m |
Key figures: cable tray 96 to 166 cm, Cable Snake 20 mm and 2 metres, 10 cable clips, 5 m hook-and-loop tape, drill hole 60 mm, power strip with 6 sockets.
Product features
- Six products for cables and power
- Colour of cable tray, snake and Ring of your choice
- Installation tool for the Cable Snake included
- Cable clips with 3M adhesive strips
- Grounded VOLT_IN Ring with USB
- Power strip with mounting brackets
What's in the box?
- 1 x Ergopro Extend cable tray with manual and mounting material
- 1 x Cable Snake 20 mm, 2 metres
- 1 x installation tool
- 10 x Ergo Organizer cable clip with 3M adhesive strip
- 1 x roll of Textie hook-and-loop tape, 5 metres
- 1 x VOLT_IN Ring Ø60 mm with mounting nut and cover plate
- 1 x 6-way power strip with 3 metre connection cable
Frequently asked questions
Specifications
| Warranty | 2 years |
| Type of guarantee | The Ergowerken free return guarantee service |
Reviews Cable and power kit for sit-stand desk with cable tray
Every month a review with a photo or video wins a voucher. We choose on content and publish all reviews, including critical ones. Read how we handle reviews











