
Stel hier je vraag over dit product
INUTEQ Bodycool Xtreme cooling vest - Visma-Lease a Bike
Product description of INUTEQ Bodycool Xtreme cooling vest - Visma-Lease a Bike
An ode to the Bodycool Xtreme Visma-Lease a Bike
Yellow up front
In cycling, yellow is the colour of the leader. You don’t wear this vest to stand out in the peloton, but to stay cool when the sun is beating down on the tarmac. Dip it in water, wring it out, put it on: that wet start takes some getting used to. Once you’re riding in the wheels and the ride gets going, you’ll be glad you have it on.
Why the Bodycool Xtreme Visma-Lease a Bike?
Cool on the bike
The Bodycool Xtreme Visma-Lease a Bike is an evaporative cooling vest for cyclists who run hot. Think of a training ride in full sun, a long climb or a sportive on a scorching day. Simply dip the vest in water, wring it out and put it on. From that moment on, the Bodycool Xtreme Visma-Lease a Bike cools your body to around 15 °C below the ambient temperature.
How it cools
The Bodycool Xtreme Visma-Lease a Bike cools through evaporation. The water in the PVA panels evaporates slowly, drawing heat away from your body. On the bike you almost always have riding wind, and it is precisely that airflow that makes this vest effective. The vest cools best in dry air with a bit of wind; in humid air, you’ll notice it less.
Because the Bodycool Xtreme Visma-Lease a Bike needs airflow, wear it as an outer layer or over a thin cycling jersey. Under a rain jacket or windproof shell, the moisture cannot evaporate and the vest provides hardly any cooling. If you want cooling under your clothing, a cooling vest with PCM cooling packs is a more logical choice.
What makes the Bodycool Xtreme Visma-Lease a Bike so good?
Faster evaporation, more cooling
The difference lies in the panels. The Bodycool Xtreme Visma-Lease a Bike uses super-absorbent PVA panels that hold a lot of water and let it evaporate more quickly than a standard evaporative vest. That faster evaporation provides more cooling, which is welcome during intensive cycling in the heat. It does mean the vest is spent a little sooner, but during a hard effort in the heat, that extra cooling more than makes up for it.
Light and snug
The Bodycool Xtreme Visma-Lease a Bike is a lightweight vest with a snug fit. It stays out of your way while cycling and keeps the panels close to your skin. The vest feels slightly damp when worn; that comes with this type of cooling vest.
Ready in a minute
Activating it is simple. Hold the Bodycool Xtreme Visma-Lease a Bike under water for about a minute, squeeze out the excess water and the vest is ready. No electricity, no fridge, no waiting. If the panels dry out completely, they become stiff: just wet the Bodycool Xtreme Visma-Lease a Bike again and it becomes supple once more.
Don’t miss this either
Where the vest works best
The Bodycool Xtreme Visma-Lease a Bike comes into its own outdoors and in motion, which is exactly what cycling delivers. If you are standing still in a windless, sweltering room, you’ll get less out of it than on the bike with riding wind. Keep that in mind when planning a hot ride.
Before and after the ride
You can also use the Bodycool Xtreme Visma-Lease a Bike for pre-cooling: put it on before you set off, so you start your effort cooler. After the ride, simply take the wet vest off. Then let it dry in an airy place until you wet it again.
Health and safety
The Bodycool Xtreme Visma-Lease a Bike is made of PVA (polyvinyl alcohol), a material that is not classified as hazardous according to the Inuteq safety data sheet. It contains no substances of very high concern (SVHC) and is non-flammable.
Under normal use and direct skin contact, no risks are known for the Bodycool Xtreme Visma-Lease a Bike. The material is not intended for contact with food. All Inuteq products comply with the European REACH regulation (1907/2006/EC).
Pros and cons
- Ready to use in a minute
- Light and snug on the bike
- Works well with the riding wind
- Machine washable
- Limited edition Team Visma-Lease a Bike
- Feels damp when worn
- Less suitable under a jacket
Key specifications
In short: the Bodycool Xtreme Visma-Lease a Bike is an evaporative cooling vest for cyclists who run hot. Important: the vest has a snug fit, so measure your chest and waist, and it works best with riding wind or airflow.
| Type | Evaporative cooling vest (INUTEQ-PVA®) |
| Edition | Team Visma-Lease a Bike (limited edition) |
| Colour | Yellow |
| Cooling | up to 15 °C below ambient temperature |
| Cooling duration | 1 to 4 hours |
| Sizes | XS to 2XL |
| Activation | Soak in water, squeeze out |
| Washing | machine washable, do not tumble dry |
| Cooling panel material | 100% polyvinyl alcohol |
Key figures: cools to 15 °C below ambient temperature, 1 to 4 hours of cooling, sizes XS to 2XL.
Product features
- Evaporative cooling via PVA panels
- Cools to 15 °C below ambient temperature
- 1 to 4 hours of cooling per use
- Activates with water only
- Sizes XS to 2XL
- Lightweight, snug fit
- Machine washable
- Limited edition Team Visma-Lease a Bike
Size chart
This vest is snug: measure your chest and waist, don’t rely on your usual size.
| Inuteq size | 1. Chest circumference (cm) | 2. Waist circumference (cm) |
| XS | 86-90 | 74-78 |
| S | 90-94 | 78-82 |
| M | 94-98 | 82-86 |
| L | 98-102 | 86-90 |
| XL | 102-106 | 90-94 |
| 2XL | 106-110 | 94-98 |

Do your chest and waist measurements fall into different sizes? If so, go by your chest measurement.
Care instructions
- Machine washable with a mild detergent
- Can also be hand washed
- Do not tumble dry
- Hang to dry
What’s in the box?
- 1 x Bodycool Xtreme Visma-Lease a Bike cooling vest
Frequently asked questions
Specifications
| Item number |
XS - ERGO-1513020706 S - ERGO-1513020707 M - ERGO-1513020708 L - ERGO-1513020709 XL - ERGO-1513020710 2XL - ERGO-1513020711 |
| Manufacturer's item number |
XS - 1513020706 S - 1513020707 M - 1513020708 L - 1513020709 XL - 1513020710 2XL - 1513020711 |
| Warranty | 1 year |
| Type of guarantee | The Ergowerken free returns guarantee service |
| Brand | INUTEQ |
| Material | 100% polyvinyl alcohol (cooling panels) |
| Colour | Yellow |
| Cooling technology | Evaporative cooling (INUTEQ-PVA®) |
| Sizes | XS to 2XL |
| Suitable for temperature | Up to 40 °C |
| Washing instructions | Machine washable, do not tumble dry |















