
Offerte aanvragen
Jouw offerte op maat, binnen 24 uur in je mailbox. Voor als je interesse hebt in aantallen. Of goedkeuring nodig hebt voor je bestelling.

Je vraagt een offerte aan voor:
Stel hier je vraag over dit product
R-Go Caparo D2 Dual Circular Monitor Arm
Beschrijving R-Go Caparo D2 Dual Circular Monitor Arm
An ode to the Caparo D2 monitor arm
Good inside and out
Look, it's important to maintain a correct posture while working. R-Go understands that. But it's just as important that nature doesn't have to suffer. R-Go understands that too!
Why the R-Go Caparo D2 dual monitor arm?
With the R-Go Caparo dual monitor arm, you can adjust the height and rotation of your screens. Both arms can be adjusted independently. You can adjust the height by hanging the arm higher or lower on the pole. This is done using a convenient swivel mechanism. You can also effortlessly adjust the height further thanks to the gas spring arms.
You can attach the Caparo in two ways. With a desk clamp, you can easily attach it to the edge of your desk (max. 55 mm). With the grommet mount, you can attach the dual monitor arm into a hole in your desk (Ø 60, 80 mm).
Using a VESA mount (75 and 100 mm), the screens are attached to the arm. More information about VESA mounts can be found here. The arms are suitable for screens up to 9 kg. Furthermore, they feature built-in cable management to keep your desk free of cables.
What makes a monitor arm so good?
A monitor arm makes your monitor optimally adjustable. Height, width, and viewing angle improve your working posture so that your body can find more relaxation. This way, you work comfortably for longer and are less likely to develop complaints in your back, neck, or shoulders. An arm for multiple monitors can also boost productivity.
Get the most out of this product
Make sure you are sitting in a good, upright posture in your chair. Then place the screen perfectly straight relative to your desk and move the monitor up until the top edge of the screen is at eye level.
Finally, check if you are sitting approximately an arm's length away from your screen. Ergonomic mouse next to it, keyboard in front, and get to work. Ah, what a relief!
Don't miss this either
The R-Go monitor arms have been developed with nature in mind. All materials are fully recyclable. Furthermore, R-Go has had an LCA drawn up for each product by Ecochain, taking into account production, transport, and “end-of-life”. Based on the number of sales, R-Go has trees planted by One Tree Planted with the aim of offsetting emitted CO2 within 15 years. However, trees last much longer!
How happy will my body be with this?
- Neck
- Back
- Eyes
- Shoulder
Pros and Cons
- 5-year warranty from a Dutch brand

- Rotatable, tiltable, swivelable
- Easy to attach
- Includes cable management
- Easy to adjust
- Only available in one colour
Brief specifications
| Warranty | 5 years |
| Ergonomic design | |
| Colour | Black/Silver-grey |
| Adjustable | Yes; tilt, rotate, and swivel |
| Maximum load capacity | 9 kg per arm |
| view all specifications |
Product features
- Built-in cable management
- VESA monitor mount
- Gas spring arm
- Attachable with desk clamp
- Attachable with grommet mount
What's in the box?
- Caparo D2 dual monitor arm
- Manual
Frequently asked questions
Specificaties
| Item number | ERGO-RGOCAPD |
| Manufacturer's item number | RGOVLCA4TWSI |
| Brand | R-Go |
| Warranty | 5 years |
| Type of guarantee | The Ergowerken free return guarantee service |
| Colour | Black/silver grey |
| Number of screens | Suitable for 2 monitors |
| Gas-sprung arm | Yes |
| Maximum screen size | 26 inches per screen |
| Maximum load capacity | 3–9 kg per arm |
| Tilting | Yes, up to 40° |
| Rotate | Yes, 360° |
| Swinging | Yes, up to 180° |
| Lowest setting | 16 cm |
| Highest position | 64 cm |
| Depth | 20 to 59 cm |
| VESA minimum | 75 x 75 millimetres |
| VESA maximum | 100 x 100 millimetres |
| Method of installation | By means of a desk clamp or feed-through |
| Suitable for desk thicknesses of | 0 to 55 millimetres |
| Assembly materials included | Yes |
| Required tools | Hole saw for drilling holes for feed-throughs |
| Cable management | Yes |
| Product weight | 4.5 kg |











